The Fukushima Daiichi nuclear power plant accident on March 11, 2011 resulted in public misconception that radioactive fallout would impact the west coast of the United States.
State and local emergency managers did not have an effective way to communicate or project the effects, which led to disparate reporting and conflicting messages conveyed by the media.
(See the sequence of events in the accident at the Fukushima Daiichi plant in March 2011. How the boiling water reactor (BWR) operated in Japan, the scenario of the accident and details the actions conducted during the crisis. Courtesy of Institut de Radioprotection et de Sûreté Nucléaire – IRSN and YouTube. Posted on Jun 19, 2012.)
The Federal Emergency Management Agency (FEMA) identified the need for a systematic platform where technically accurate and decision-making information could be easily shared across state, municipal and tribal jurisdictions.
They contacted the Department of Homeland Security (DHS) Science and Technology Directorate (S&T) – DHS’s research and development arm – for assistance.
That partnership has grown beneficially for both organizations and generated numerous success stories.
Since 2015, S&T’s National Urban Security Technology Laboratory (NUSTL), a testing and evaluation laboratory with a first responder focus located in New York City, has worked with RadResponder, a multi-function online network for emergency managers, first responders and radiation subject matter experts.
(Learn More about RadResponder, sponsored by FEMA, with EPA and the DOE. RadResponder provides resources for federal, state, local, tribal, and territorial organizations responding to radiation incidents and emergencies. Courtesy of RadResponder and YouTube. Posted on May 4, 2018.)
RadResponder is identified in the 2016 Nuclear Radiological Incident Annex as the national system for radiation data aggregation and is considered the standard resource for giving emergency managers a common operating picture, whether planning for the future or monitoring radiation in real time.
Groups and individuals involved in radiation response can request to create an online account and become part of this network, which currently includes thousands of organizations and individual first responders.
“RadResponder builds capabilities for state and local response and connects them with federal assets from FEMA, the Environmental Protection Agency (EPA) and the Department of Energy (DOE),” said Ben Stevenson, an S&T Program Manager located at NUSTL.
While FEMA owns RadResponder, S&T, EPA and DOE have supported the development of some tools within the network.
In January 2018, FEMA adopted the Radiation Decontamination tool (Rad Decon), developed by S&T and the EPA, into the system.
Its developers refer to it as a “discussion support” tool meant to provide executive decision makers and subject matter experts a common information source to draw from in disaster preparation.
Even more recently, RadResponder added the Radiological Operations Support Specialist (ROSS) toolkit, an S&T-funded HTML tool that organizes important reference material for radiation specialists, to support subject matter experts in their analyses.
“RadResponder is constantly evolving,” said James Blais, FEMA’s RadResponder Program Manager.
“S&T has been very active lately, helping with ROSS and Rad Decon, to spot needs and provide insight and perspective slightly different than what we had.”
A thriving network
RadResponder consolidates information from all levels of government to benefit operations.
In the past, local emergency response plans have been made independent of other agencies and governmental elements, with varying methods and effectiveness.
Now, with radiation data federated on RadResponder, state and local governments are given a uniform, constantly updated set of tools to build their approach.
The common platform allows several entities to communicate with each other where they might not otherwise.
“Some people use it to build relationships with other organizations,” said Blais.
“It’s like [a social network] for the radiation community.”
RadResponder is gradually becoming a more holistic radiological emergency network, and it continues to grow rapidly as more response agencies join and new tools are added.
Organizations have been eager to join—Michigan has adopted RadResponder state-wide, and Iowa and Kansas use it to track background radiation.
These organizations benefit from the different tools in the network, which are updated constantly.
“We want to help communities at large become more resilient instead of reinventing the wheel at every turn,” said Blais.
A “discussion support” tool
Whether a catastrophe is natural or man-made, emergency managers need to respond quickly with the optimal solution.
Making decisions on the fly can be difficult, which is why significant planning must go into a disaster response strategy.
Many conversations need to happen, and they need to cover a range of possible scenarios.
The Rad Decon tool was developed to facilitate those very discussions.
While some executive decisions can be supported by a straightforward decision tree, there are other problems—in this case, large scale radiological incidents—for which the solution depends on more nuanced factors.
This is where the “discussion support” (as opposed to “decision support”) distinction comes into play.
Radiological emergencies could require a different response depending on the type of radiation, the landscape or the time of year.
The Rad Decon tool guides users through a continuum of parameters and priorities they can set based on the conditions of a specific radiological event to prioritize decontamination strategies.
The tool uses this data to provide a list of possible solutions that gives a common point of reference to guide the emergency management conversation. The application even allows for printable results to aid the discussion.
(Learn More. RadResponder was recently in Kansas City to lead a 3-day training with departments of health from Kansas, Iowa and Missouri. We sat down with Angela Leek, Chief of Radiological Health at the Iowa Department of Public Health, to talk about the training and her department’s implementation of RadResponder across the state. Courtesy of RadResponder and YouTube. Posted on May 4, 2018.)
“The Rad Decon tool is designed to take you from all your options to a couple key options,” added Stevenson, “We want responders to have the ability to collect data and make decisions quickly and more efficiently.”
The tool was inspired in 2013 by a decision making model used in the United Kingdom.
S&T and the EPA worked together to establish the needs the tool should fulfill, and they were then able to put together the pieces to fully transition it to the FEMA-hosted network.
The ROSS toolkit was implemented in May 2018, providing an infrastructure to better integrate subject matter experts from the ROSS program, a position in the emergency management structure that can provide radiological expertise to incident commanders and emergency managers.
The toolkit provides a ROSS with a streamlined analysis capability, aiming to further improve the quality of information provided to first responders around the country—in this sense, the entirety of RadResponder serves as “discussion support,” promoting dialogue between organizations, leveraging the strengths of their experts and executives.
More than a toolbox
The RadResponder network provides a host of other tools for emergency managers to keep informed, with videos, repositories of past drills and exercises, training information, factsheets, manuals and more.
Exercises are catalogued in several different ways, using dashboards with charts, graphs and even interactive maps to provide insight for the future.
Users can search for past events and view this information in any one of these interactive forms. They can also filter activity down to their own organization to stay updated on their own events, equipment, facilities and personnel.
Radiological response teams around the country have joined RadResponder, able to connect their radiological detection hardware—computers, meters, samplers, etc.—to the network to perform experiments and store data in real time.
The network can connect to detectors through Bluetooth equipment, a mobile app or, simply, a radio.
State and local governments have used the network to test, plan and train their radiological response teams.
RadResponder is also integrated into the Radiological Dispersal Device (RDD) Guidance, providing a science-based tool for responding in the First 100 minutes of an RDD detonation, recently released by DHS S&T, FEMA and DOE NNSA.
Another recent addition to the network was the ability to merge data from different events together—an example of how RadResponder helps give experts a unified picture of radiological response across agencies.
The network also recently made the mobile app accessible to a wider range of smartphones, which will allow more robust communication, more data shared between and within organizations in their planning and research.
(Learn More. See instruction on RadResponder mobile apps, for use on approved Apple and Android devices. Courtesy of RadResponder and YouTube. Posted on May 28, 2014.)
